[Racer_Rick]

Looking for a set woth a big dome & deep intake reliefs. Throw something out & let me see if there's something out there before I buy a new set

 

[Paul Kane]

Not exactly sure what you're looking for here Rick (pistons for which heads, which bore, pin height, etc.), but I have a brand spanking new set of Speed-Pro TRW L2443NF-030's, complete with pin's, clips and even a ringset. Still boxed up.

Summit wants about $475 for this whole package; I'll ship them to your door for $400, if you live in the lower 48 United States.

Paul

 

[Racer_Rick]

I have blue thunder heads but the Probe pistons don't have enough dome for squat. I have Eagle rods bushed down to a .990 pin but even that's an easy fix. My biggest problem is a deep enough valve pocket. My Lunati cam, .735 lift, hits the current pistons. Might be able to use them on a different project, let me check

 

[Randy Mickelberry]

What block do you have

A friend of mind has a set of 4.55 for a svo block with about 14 to 14.5 comp. for $400.00

 

[Racer_Rick]

Still running a stock block, 4.392" bore. Thanks

 

[429sluggo]

Give "Pullin' Bret" a call at PFC engines. 1-573-793-2177

He can help you with a high compression custom piston if you want to go that route.

Tell him Eric from Diamond referred you.