460 Ford Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
188 Posts
Discussion Starter · #3 ·
I have blue thunder heads but the Probe pistons don't have enough dome for squat. I have Eagle rods bushed down to a .990 pin but even that's an easy fix. My biggest problem is a deep enough valve pocket. My Lunati cam, .735 lift, hits the current pistons. Might be able to use them on a different project, let me check :D
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top