460 Ford Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1 (Edited)
hate to do this but I am forced to sell parts off my race motor. used new style trick flow a460 heads 2.35 int 1.88 exh comp 948 triple springs manley ti retainers 7/16 trend taper wall push rods full set of 16 +SPARES jomar pro stud girdle. ports have been cleaned up but not ported only bad thing one head has epoxy by the oil drain back hole BUT RUNS FINE been like this for allong time stock 91cc chambers .also head studs are included ever thing listed above is included ready to install and use 2700.00 plus shipping. new style a460 single four intake some clean up port work 400.00 also comp custom ground roller cam 114 center .833 int .813 exh with 1.73 rockers located in mich email [email protected] pay pal is ok but will add 5 percent to the total this package run in a 3700 pound car and 548 ci ran a best time [email protected] mph on motor only makes a ton of power and torque prices are neg some but don't be real can take pics also would sell as a total package
 
1 - 5 of 5 Posts
Top