460 Ford Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Well here's the story guys. I bought a used race engine just because it was built with so many high end parts and it's low price. I needed to dumb it down, to use on my airboat. It had a half-dozen passes in a sand-rail. It was in beautiful shape.( According to my machinist.) We added dished pistons and a new torque cam and lifters. Then as the build progressed we went down to a performer air-gap and an 800cfm edelbrock. So I have all these parts that need to go. 4500 Holley 1050cfm carb 4500 air cleaner 4500 Edelbrock Victor intake 4500 150-250hp nitrous kit (bottle, plate, and plumbing) Crane cam marked 358841 35-35.06 CR I have the roller lifters, pushrods, and studs, that were in the engine Points distributor and set of Ford silicone race wires and an aluminum waterneck Everything must go. Prefer one buyer for everything. Dont know what its all worth. Shoot me a fair offer and we"ll go from there. Oh yeah! The guy, I bought the motor from, said that, with the .040 over pistons,(sold) and the rest of these parts, the motor was 850 to 1100hp with full dump on the nitrous. Ran at 8500+ rpm Call 402-867-2226
 
1 - 1 of 1 Posts
Top