460 Ford Forum banner

1 - 20 of 29 Posts

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #1
A pair of castings is now in R&D and will be fully ported and digitized. Flow numbers and port volumes will be posted as they become available.

The castings will be available fully assembed and ready to rock in three different levels. No bare castings will be available per my pricing agreement with peter. Quality generic parts will be utilised to keep costs reasonable.

Level one: $999.95 280 / 180 CFM

Base 2.08"/1.65" small valve equipped with std one piece replacement valves, std valve job, generic 926 comp spring equivalent spring package, p/c seals, rocker studs and guideplates.


Level two:$1,350.95 300 / 190 @ .600"

2.08" / 1.65" equipped with S/S sinus valves, competition valve job with fully blended bowls and rolled short turn radii, single spring with damper spring package, p/c seals, rocker studs and 5/16" guideplates. Dual springs add $40.00

Level three: Call for cost 340/240 cfm max

Hand ported 2.19"/1.75" equipped with S/S sinus valves, Dual comp 924 equivalent flat tappet spring package, competition valve job, teflon P/C seals, rocker studs and 3/8" guideplates. Chambers sized to order.

Email or telephone for further information and delivery times. Castings are currently in stock as of july 19th.



8)
.
.
.
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #2
Bump as they are now available...

n/m
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #3
ttt

n/m
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #6
ratter said:
Would you ship to Australia and ifso can you find out costs to postcode 3199
I can ship my finished work to australia but will need to look into the costs. email me for more information.



8)
.
.
.
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #7
8liter said:
Just curious...what about cnc bare?

Thanks.
As stated in my first post no bare castings will be sold based on my agreement with pro comps owner...





8)
.
.
.
 

·
Registered
Joined
·
612 Posts
The Mad Porter said:
8liter said:
Just curious...what about cnc bare?

Thanks.
As stated in my first post no bare castings will be sold based on my agreement with pro comps owner...





8)
.
.
.
Me not readie good......
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #9
ttt

n/m
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #10
ttt

ttt
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #11
ttt

ttt




8)
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #12
ttt n/m

n/m
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #13
ttt n/m

n/m
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #14
Da bump...

n/m



8)
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #16
fastfox89 said:
ok i have a few questions

1 what kind of power can these heads support
2 what exhaust port pattern do they have




thanks kris
Based on intake flow rates about 700 HP.

TFS exhaust port pattern. Raised about .150" over stock and utilising a cj exhaust gasket.



8)
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #18
Noted...

fastfox89 said:
thank you sir i need just a tad more than that

Thanxxx for looking...




8)
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #19
ttt n/m

n/m
 

·
Premium Member
Joined
·
8,660 Posts
Discussion Starter #20
TTT n/m

ttt
 
1 - 20 of 29 Posts
Top