460 Ford Forum banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
1,957 Posts
Discussion Starter #1
This is the crank I have been running in the Torino for the last several years. The journals are std/std. It has been balanced with mallory. $350.00 worth of work just to the crankshaft balancing. It's weighted for a 6.8" rod and a Probe forged piston.

Additionally, I just had the crank checked out at the machine shop last month and there are no cracks.

This crank is good to go. I upgraded to a forged crank due to a HP increase, so this one needs a new home.

$400.00 + shipping. Shipping to either coast is in the $50.00 range.

Greg
 

·
Premium Member
Joined
·
1,957 Posts
Discussion Starter #3
PM replied.

Also, I have had a number of questions on the crank, and I was not clear on a couple of things.

The crank uses 2.2" BBC rod journals.

It was balanced for steel 6.8" H-beam rods.

It was checked for cracks a couple of weeks ago and got a clean bill of health.

IIRC it has 5 slugs of mallory in it.

Thanks,

Greg
 
1 - 5 of 5 Posts
Top