460 Ford Forum banner
1 - 2 of 4 Posts

· Registered
4 Posts
Discussion Starter · #1 ·
Hello, I was wondering if this damage is repairable by just work with a dremel to smooth things out or if I need to go another direction for it? I did not cause the damage, they are pictures from a used head.

Thank you for the advice!
Gas Circle Auto part Automotive tire Metal
Gas Font Auto part Metal Circle

· Registered
4 Posts
Discussion Starter · #3 ·
Deck the cylinder heads to minimize issues with the quench pads.
Knock down the gouges in the chamber
Check valves so see if they are bent.
Check seats for damage.

Call it good.

Scotty J. "AKA" The "Mad Porter"
"EMC 2006" 3rd place finisher
Ported BBF iron head specialist & Aluminum heads from all sources.
Custom ground cams
See our products in the Vendor for sale section
Customized crate engines
"Parkland Performance Auto Machine" Formerly RHP
Parkland Auto Machine
Thank you for the quick response!
1 - 2 of 4 Posts