460 Ford Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter #1 (Edited)
Looking for a used ford motorsports A460 iron block at 4.5bore or slightly smaller. Tall deck of course. Nothing damaged. Can be sleeved but needs to be at small bore. Needs to have 4bolt mains, with screw in core/freeze plugs, an the extra 8 holes to use C-heads. Am ok if lifters have been bushed for better oil control. Am also ok if block has been partially filled to help stiiffen. Let me know what u have. Text is preferred at 484707 three four five three an will reply back when I can. This is for a project, so am not in a rush. Don't want new unless ur biuld plan changed.
 

·
Registered
Joined
·
53 Posts
Discussion Starter #4
Hey, thanx for spotting that, but still searching. Text me what u got or know of one. Pockets ain’t deep enuf yet for new.
 

·
Registered
Joined
·
53 Posts
Discussion Starter #5
If it makes a difference, the plan is to build a 598, but don’t want someone’s fresh shortblock. Have most of the internals already, just looking for the block. If you have a shortblock an willing to sell block separately an part the rest out, give me a text, maybe we can get together. Am willing to travel somewhat an me u part way. Thanx
 

·
Registered
Joined
·
1,404 Posts
If it makes a difference, the plan is to build a 598, but don’t want someone’s fresh shortblock. Have most of the internals already, just looking for the block. If you have a shortblock an willing to sell block separately an part the rest out, give me a text, maybe we can get together. Am willing to travel somewhat an me u part way. Thanx
Check these site's out, might be some help..........

https://www.facebook.com/groups/720460891424118/

https://www.facebook.com/groups/691263030975827/

Cheers, Bob
 
1 - 7 of 7 Posts
Top