460 Ford Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter #1
Comp cams .796/.796 290/302 @.050" 112 ls

Comp cams .814/.814 281/296 @ .050" 112 ls

Crower .666/.668 264/268 @ .050" 108ls

All in excellent condition, $275 each plus shipping

409-392-6434
 

·
Registered
Joined
·
127 Posts
Discussion Starter #3
Roller cams

The manufacturer is listed next to each camshaft.

The RPM range would of course depend on your application, but the larger of the three cams were run in a 572 and a 557, both of which made good power to 7500 rpm.
 

·
Registered
Joined
·
127 Posts
Discussion Starter #5
They are all in excellent condition. Switched them out as you do chasing that last elusive horsepower since then I have switched combinations completely and can't use these.
 

·
Registered
Joined
·
5,676 Posts
If the Crower is the 290R grind, I ran that grind in my boat motors for years and that's a very stout grind. It loves compression. It was originally designed as a circle track grind but is a general all around usable grind. I loved it.
Good luck with your sales.
Rob
 

·
Registered
Joined
·
127 Posts
Discussion Starter #8
Thanks Rob. Each of these was great in their respective applications but the 290R is a great all around cam.

$250 shipped each
 
1 - 8 of 8 Posts
Top