460 Ford Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
168 Posts
Discussion Starter · #1 ·
who makes the shallowest oil pan on the front part of the pan using a rear sump pan? I need clearance because my engine is close to the frontend. I need something probably 4.5 to 5 inches if possible on a wet sump system.
 

· Registered
Joined
·
10,855 Posts
who makes the shallowest oil pan on the front part of the pan using a rear sump pan? I need clearance because my engine is close to the frontend. I need something probably 4.5 to 5 inches if possible on a wet sump system.
It can't happen; by anybody ... unless you take the oil pump out of the pan.
 

· Registered
Joined
·
3,790 Posts
Mike(GoinPostal) has a 69 Mach w/M11 frt end and the pan hit. When I built his engine I shimmed the engine up enough to get the Moroso Pan to work. Worked out great.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top