460 Ford Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #1 (Edited)
SOLD...Special on budget ported D3 castings available now.

SOLD...


One pair of D3 castings on the shelf and available for immediate shipment.

Budget ported to 304 / 180 cfm at .600"/ .500" lift with particular attention paid to low and mid lift flow.
Decked to 92 cc chamber size
Stainless steel 2.08" / 1.65" one piece valves with 30 degree back cuts
Upgraded spring, retainer and lock package 110 / 280 open pressure. Single with damper
Bronze valve guide liners
Hard Seats on the exhaust side.
Guides topped and cut for viton metal clad P/C seals

Castings will be worth a minimum of 40 HP in a stock application and will easily support 1 hp per cubic inch with out a mondo cam. They are ready to bolt on and rock and roll.

Cost is $1,050.00 plus shipping. We will throw in a remanned and recurved duraspark distributor at 50% off to sweeten the deal !!!

Bolt on an easy 40 to 50 hp or more..

These are the same style castings that made 450+ hp in this build:

http://www.460ford.com/forum/showthread.php?t=153931


:D


.
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #2
TTT

9 Day bump ttt...



:D
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #3
TTT

9 Day bump ttt...


:D
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #4
TTT

Bump to the top...


:D
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #5
TTT

7 Day bump ttt...


:D
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #6
SOLD...

Package sold.

Thank you for choosing RHP Kino.


:D
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top