[hbstang]

i have a 68 mustang with a bbf and a 1050 dominator,and i used a lokar universal pedal and cable.it gets to be very hard to push into the scondaires and i wonder if there is a better set up for an early mustang?i know there is someone who has had this issue and found a solution on here!dan.

 

[4thHorseman]

I happen to have a '69 Mach with a BBF and a 1250 on top. I used an aftermarket cable like yours attached to the stock gas pedal with a quality dominator cable bracket from PRP.

http://cgi.ebay.com/ebaymotors/PRP-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

The spring tension isn't hard on the ankle, the bracket don't flex or move, and its a clean setup.

 

[jcoxracing]

I am using the stock pedal and rod with a mr. gasket univeral cable.
http://www.summitracing.com/parts/MRG-5657/
I will try to get you some pics if you want, I could get some of the motor plate while I am at it.
Justin

 

[hbstang]

pedal

thanks for the replies.i do have a stock 69 pedal assembly so i may try to us that instead of the lokar.dan.