460 Ford Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter #1
looking to trade a set of VERY NICE Motorsport A460 heads for some Blue Thunder's with BBC exh and a little cash my way. heads are fresh with 0 runs, have 390cc int runners, don't remember exh runner size but can cc them for anyone that wants to know, 67cc chambers that were angle milled and the intake face milled so any intake will bolt up to them, 2.400 titanium int valves, 1.880 inconnel exh valves, roller springs good to .950 lift, titanium retainers, suppose to flow 460 int, 330 exh but do not have flow sheet. may would trade on others also but would have to be REALLY NICE. only reason for thinking of this is the class i will be running has a BIG nitrous penalty for the A460's. would also sell outright for $3200, but had rather do some trading.

662-610-4528

thanx,
Jason
 

·
Registered
Joined
·
707 Posts
Re: Trade A460's for Blue Thunders with BBC Exh or MAYBE oth

JASON
I HAVE A COMPLETE SET ON PORTED B460 HEADS
INTAKE PORTS ARE STILL THE B460 SIZE
IN A 2400 LB CAR WITH A 350 LB DRIVER
THEY RAN A 5.80"S 1/8 MILE

IWOULD LIKE TO TRADE FOR A SET OF PORTED A460 HEADS
IF YOU or ANYONE ELSE IS INTERESTED LET ME KNOW

THANKS
GEORGE

[email protected]
 

·
Registered
Joined
·
65 Posts
Try pm'ing CP598, I believe he has a real nice set of blue thunder chevy

exhaust port heads he was wanting to trade for A heads.
 

·
Registered
Joined
·
176 Posts
Blue Thunder Heads

Hi Jason, I do have a very nice set of Blue Thunder "B" heads and might be interested in a trade. I will try to contact you in a couple of days. I have some commitments this weekend.

Thanks.

Vern
 

·
Registered
Joined
·
253 Posts
heads

I have a complete set up of a-429 heads,set for roller , prof. port joband matching victor also prof. ported,with a pro fogger set up installed. drilled and tapped for injection but I run a car on gas. car run low 6's on motor and well into 5's on nos. I live in fayette al so we're not far apart. If your interested shoot me a line and I'll go into more detail about the combo. Ward :?:
 

·
Registered
Joined
·
77 Posts
Discussion Starter #8
i've almost decided to just keep mine and run em this year then build a 600+-ci engine with them next year, if i change my mind i'll let you know, and sorry for not getting back to you

thanx,
Jason
 

·
Registered
Joined
·
253 Posts
heads

Thats cool. Where do you race ? I hope to build a big inch a head motor as well but I 'm in no hurry my motor is fresh rigt now. Ward 8)
 

·
Registered
Joined
·
77 Posts
Discussion Starter #10
i'm planning on running at jackson, tn next year in a class up there called cheap street, it's a stock susp 275/60 drag radial class, where do you run at
 

·
Registered
Joined
·
253 Posts
races

I just run here and there, Aberdine ,molton ,bama, . I mostly run 6.0 heads up but I spray it and run grudge races ect .they havea new track I 22 hope they are going to host orsca. give me a call sometime jackson is no to far . ward maybe we should move this to chilly's :)what kind of times does it take to be competatiive in this class? I'm on stock susp.
 
1 - 11 of 11 Posts
Top