460 Ford Forum banner

1 - 17 of 17 Posts

·
Registered
Joined
·
159 Posts
Discussion Starter #1 (Edited)
Complete, CNC'd with 2.350 intake valves, solid roller springs with titanium retainers. Never hurt/ low # of passes. Flowed 455/355, have flow sheet to go with heads. Will take $2500+shipping. They are 10 bolt heads.-Scott

Also have a couple solid roller cams for BBF, 288/310ish @ .050... I'll get exact specs if intrested. Will take $150.00 ea.
 

·
Registered
Joined
·
159 Posts
Discussion Starter #2
Complete, CNC'd with 2.350 intake valves, solid roller springs with titanium retainers. Never hurt/ low # of passes. Flowed 455/355, have flow sheet to go with heads. Will take $2500+shipping. They are 10 bolt heads.-Scott

Also have a couple solid roller cams for BBF, 288/310ish @ .050... I'll get exact specs if intrested. Will take $150.00 ea.
Am I over priced????
 

·
Registered
Joined
·
159 Posts
Discussion Starter #7
I'm interested in full cam specs.
One of them is 285/304 @ .050 318/342 advertised .838/.813 lift single dowel pin


The other is one I got from Jon Kaase. It is part # 4068R-1066R-114 It is double dowel pinned. I found the intake lobe profile on Comps website, but could not find the exhuast. The intake is [email protected]/328 adv./.830 lift. Best I remember, the exhuast is 300+ @.050 and a little over .800 lift.
 

·
Registered
Joined
·
159 Posts
Discussion Starter #9
whats the lobe seperation on the 1st one? and what rocker ratio are you using to get the lift?
Whoops...forgot that. The first cam is a 114 lobe sep. and both cams are figured with a 1.73 ratio rocker.

Someone come buy these heads, only selling these to buy a pair of 18 bolt versions.
 

·
Registered
Joined
·
256 Posts
do you still have the cam from the small bb ford that you had a little while ago? if so let me know, and i still need to get on your dyno asap. thanks corey.
 

·
Registered
Joined
·
13 Posts
One of them is 285/304 @ .050 318/342 advertised .838/.813 lift single dowel pin


The other is one I got from Jon Kaase. It is part # 4068R-1066R-114 It is double dowel pinned. I found the intake lobe profile on Comps website, but could not find the exhuast. The intake is [email protected]/328 adv./.830 lift. Best I remember, the exhuast is 300+ @.050 and a little over .800 lift.
What size are the other 2 cams?
 
1 - 17 of 17 Posts
Top