460 Ford Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
232 Posts
Discussion Starter #1 (Edited)
Hooker SUPER COMPS for 3/4 ton and 1 ton 4 wheel drive f250/f350's. We used them on an 85, but I believe they will work on anything from 1980-1996. These are the 1-7/8 inch deals, not coated, and I believe they were over $400 new, so we're asking $200. We switched to an NP435/205 deal and are in need of fenderwell exits if you would like to horse trade.

Howards springs #98636, 1.520 diameter, 130# @1.875, 325# @ 1.300. These would be good for a healthy flat tappet cam. They are brand new in box. We changed some things and ended up needing longer springs and didn't get these returned in time. They were around $100, so say $75. I also have the titanium retainers to match these springs and the +.030 locks. I don't have part numbers for those at the moment, but I'll post them later today. Whatever I paid x .75 = your price.

I also have a custom grind flat tappet cam that is new in box. Again, we changed the plan so this cam and the springs above wouldn't work. They would work well as a matched set on your early iron headed 460. I thought I had the cam card here in the house, but I must have taken it back out to the shop. I'll post up specs later today, but is a solid f/t, dual pattern with not quite .600" and like 230/240 @ .050. $200 new, so say $100.

I think the prices are fair, so they are pretty firm. Buyer pays shipping from Madison, Wisconsin. Thanks for looking and have a nice day!

Jared
608-617-5545
 

·
Registered
Joined
·
232 Posts
Discussion Starter #2
These are the headers. My brother just cleaned them up. They have O2 sensor bungs tig welded into the collector also.




 

·
Registered
Joined
·
232 Posts
Discussion Starter #6
I paid $83 for the springs, $200 for the retainers, and $21 for the locks. 75% of that would be about $225+ $100 for the cam. Specs on the cam are .597/.588, 244/254 @.050.

-Jared
 

·
Registered
Joined
·
232 Posts
Discussion Starter #7
Bump for the holiday weekend. Hope everybody has a wonderful time with family and friends. Thank you to all our veterans and God bless America.

-Jared
 

·
Registered
Joined
·
232 Posts
Discussion Starter #9
Bump

I'd prefer to deal over the phone if possible.

608-617-5545

-Jared
 
1 - 9 of 9 Posts
Top