460 Ford Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
130 Posts
Discussion Starter #1
I am putting a vacuum guage on our 545, and I was wandering where the best place is to put the port or if there would be anything wrong with putting it in the fuel pump block off plate. I have trick flow A heads and intake so there are no vacuum ports. Any suggestions? Thanks
 
T

·
Guest
Joined
·
0 Posts
I drilled & tapped my intakes lifter valley tray behind the carb pad. Nice & out of the way. Sure don't want to accidently break my Racepak sensor. :D
 
1 - 2 of 2 Posts
Top