460 Ford Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
562 Posts
Discussion Starter #1
venolia pistons for bbf. 4.560bore 6.8 rod 4.5 stroke 1/16. 1/16. 3/16 ring
36cc dish valve reliefs for std bb and a460 heads. good condition with buttons
no pins. these were ordered for heavy nos. $150 in central ohio

thanks,
wayne
 

·
Registered
Joined
·
562 Posts
Discussion Starter #3
.990 pin. not sure of the length but I have the job number. guess would be about 2000-3000 street miles and 50-75 quarter passes. never had any nitrous on them.

wayne
 

·
Banned
Joined
·
4,325 Posts
Gary you do know if you use these pistons you will have to get a aftermarket block! I can't remember any factory block that will punch that much... just making sure you know that...


Be a heck of a deal on a set of pistons though



Randy
 
1 - 8 of 8 Posts
Top