460 Ford Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
182 Posts
Have set of (8) BME 426 forgings, 6.770 long, .990 pin, for 2.200 crank pin (chev). They have 22 passes on them. $400.00+ shipping
 

·
Registered
Joined
·
78 Posts
I have a set of MGP's with A1 bolts, 990 pins, 6.8's with 26 runs on them, and they were just checked out to be exact spec as they were when they were new. We pulled them out to put in shorter rods and new pistons.

$400 shipped.

I also have the pins and pistons 4.5 bore.
 

·
Registered
Joined
·
127 Posts
bme 396 forging 6.8 long

I have new set of rods,if you are interested
950.00 call me Keith szabo 7706540559 thanks.










9
 

·
Registered
Joined
·
328 Posts
I have a set of C & A 6.800 long BBC rod journal. These came out of my car when I bought it and converted it from a blown alcohol to pump gas bracket car. Previous owner said the motor had low runs and nothing inside the motor led me to believe otherwise. $200 to your door if your interested.
 

·
Registered
Joined
·
40 Posts
ttt still looking
I have 7 Brooks 88 6.800/2.200/0.990 rods. I ran them 2 seasons (Aspirated 567cid mini rod pulling) and I bought them from a friend who ran them one season in a 575cid AR 12-71 Mini rod.

The 8th one cracked during a bearing change due to a failed torque wrench.


I know that's not the greatest situation, with just 7. I feel certain the 7 are fine.

$50 plus shipping and they can be anyone's.
 

·
Registered
Joined
·
163 Posts
I have a set of 6.790 grp 990 pin 2.2 big end the big end is .010 wider for chrysler width. crank was a chrysler journal then had a chevy journal cut.grp said they would cut for no charge. still in box $600 plus the ride from 98042 darrin 253 639 2306
 

·
Registered
Joined
·
355 Posts
Nick Bruno's gotta nice set of R&R 6.8 rods, that have just been checked and got a clean bill of health...I was gonna get um this weekend, But I cant find the guy that wanted my Old CJ rods...

I think Nick's only asking $300 for them...
 

·
Registered
Joined
·
1,262 Posts
Discussion Starter #13
i wouldnt buy a used set of alum. rods with a 100 passes,although some say they last for years im skeered of that lol!
im prob. going to buy darrins,$600 for new grp's seems like a good deal to me.
i knew someone would have a new set at a good price.
 

·
Registered
Joined
·
40 Posts
I don't blame you. I just threw that out there.

I ran Brooks 66 aluminum rods in a 15:1 Methanol Pulling engine from 1994 thru 2004. I changed them in 2005 due to age. They never gave a problem. I sold them for cheap to someone who knew the age and use of them.
 
1 - 14 of 14 Posts
Top