460 Ford Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
321 Posts
Discussion Starter #1
looking for a solid roller cam for a BBF in the 680 lift range..dur XXXX ..used is ok...cheap in nice as long as its not junk
 

·
Registered
Joined
·
39 Posts
Int .714 Exh .710 261, 270 @ 50. Make you a good deal, would like to get rid of. If interested leave your cell. I live in Sand Springs.
 

·
Registered
Joined
·
5,676 Posts
Ok, I have a Crower that's in very good shape. It has a LL of .371" intake and .372" exhaust (measured). With a 1.73 =.642" and .644" (I've been running it with Harland Sharp 1.8's for a gross of .668" and .670") A/D is 290*/296*. @ .050 it's 249*/254*. It has a LS of 108*. Crower # 8620 Billet, SKU# 22402 (you can google it, I did to come up with the manufacturers data). Recomended springs from Crower: #68363. I have the original cam card also.
Rob
 
1 - 9 of 9 Posts
Top