460 Ford Forum banner

What do you think of this combo

2274 Views 9 Replies 8 Participants Last post by  Brenden
.030 460 with SRP lightweight flat tops .005 out of the bore,Truck rods with arp bolts. Comp mechanical flat tappet 310 B-8 drag race cam(310/[email protected] .656 .641)Ported D20E-AB heads with 2.30in 1.76ex valves milled to 85cc. Crane gold Race Rocker arms. Weiand Hi-Ram Tunnel Ram with 2 Holley 600 carbs. Does this sound like a good combination or would you change something. This is going into an 85 mustang coupe with M/T 28x10.5 tires 4.10 gears Auburn Pro Locker and 31 spline C-Clip elim. Axles. Comp.prepped C-4 with trans-brake with a TCI 3500 Super Street Fighter Converter. Car should weigh @ 3000lbs with driver. Any guesses on 1/4 mile times. By the way kick azz site. Lots of info. from people who truly sound like they know whats going on. :twisted:
1 - 1 of 10 Posts
I would'nt use an intake valve any larger than 2.25. Do some exhaust port work and use at least a 1.76 exhaust valve; maybe a 1.8 if it'll fit. Same as everyone else said on converter and carbs.
Sheldon G.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.