460 Ford Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
92 Posts
Discussion Starter · #1 ·
Hi guys.... Was just wondering??? what vehicle can i find a good solid 31- spline
trac-Loc posi unit I can swap into my reareand..... I'm hoping to find one out of a F-250 F-150 or a V8 Explorer... What years do I look for? and I'm only wanting the Posi-unit and hopefully it has 4:10's in it. Thanx a million!! (My car is a 92-Notch-Back, 545 stroker, 98 GT 8.8 rear-end)
 

·
Registered
Joined
·
211 Posts
F-150s also, when I did mine I rebuilt it with the 03 cobra trac-loc kit from ford,better clutches.
Jr.
 

·
Registered
Joined
·
1,317 Posts
waterslinger is correct. the axles in exploders and trucks have bigger bearings and dont fit the mustang housing. btw the ranger axles use the smaller bearing too.....bobn
 

·
Registered
Joined
·
2,387 Posts
waterslinger is correct. the axles in exploders and trucks have bigger bearings and dont fit the mustang housing. btw the ranger axles use the smaller bearing too.....bobn

Bob, while the bearings may be larger in the truck axles, the carriers are the same, so it will still work for him.
 

·
Registered
Joined
·
1,317 Posts
Bob, while the bearings may be larger in the truck axles, the carriers are the same, so it will still work for him.
thanks for clearing up the details. as long as you realize you cant use the truck axles but you are good with the truck carrier.....bobn]
 
1 - 9 of 9 Posts
Top