[turbonotch]

hi, im going to be running a 460 c6 combo stock k member with 1.5 spacers, i also have the short c6 not the longer tail section....which driveshaft should i use which will work i have no clue! i havave an 88 coupe lx 8.8 rear. was previously running a 351w c4 combo but that driveshaft wont work will it??

please help THANK YOU

 

[turbonotch]

could i get one from a recking yard from an old 1 ton truck with a c6 and just get it cut down or what? different yokes, splines etc...?

 

[stuarta]

If you have a transmission with a bolt on flange you will need a 2 piece drive shaft and center support.