460 Ford Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
5,560 Posts
Discussion Starter #1 (Edited)
UPDATED WINTER GARAGE CLEANOUT 2020 - Garage cleanout, I will be uploading pics here & there as they become available.

All prices are plus shipping unless otherwise noted. Please call High Flow Dynamics directly if interested. 31Zero-435-19ZeroZero
____
429 Commercial steel truck crankshaft, D9TE-6303-BA, offset stroked to 4.02" stroke, 2.100" SBC rod journal (std), 3.000" BBF main journal (std), Boss 429 double keyed blower snout, needs polish, $850





____
BRC forged pistons for 4.50" bore, 1.52" compression height, for standard valve layout heads, skirts and crowns have been lightened, 0.990" wrist pins and clips included, accepts 1/16 - 1/16 - 3/16 ring pack, nice, $275






____
New Mickey Thompson Boss 429 Blown Fuel Hemi racing pistons, for 4.39" bore, 1/16 - 5/64 - 3/16 ring pack, for 1.094" pins & buttons, 14 Teflon skirt buttons per piston, period correct for your Nostalgia Fuel or Cackle car, $899 set of 8.







____
New in box Comp Cams 34-343-4 solid lifter cam, with General Kinetics solid lifters, retail is $279 on Summit with the lesser Comp Lifters, offered here $229 shipped.

[/url

____

C9VE-B cylinder block ($200), thermo-cleaned ($125), mag checked ($100), Stage 1 oiling mods ($200), usable 4.39" bore, $500.





____
All prices are plus shipping unless otherwise noted. Please call High Flow Dynamics directly if interested. 31Zero-435-19ZeroZero

(Parts Listing Continued Next Post)
 

·
Premium Member
Joined
·
5,560 Posts
Discussion Starter #2 (Edited)
____

TFS B460 intake manifold, some light blending in the plenum, runner exits seem to have been shaped for an A460 "high port" application (that's my guess anyway), $325






____
Miller Big Block rocker arms, 1.7 ratio, 7075-T6 aluminum bodies, 8620 billet steel trunnions, USA bearings, etc, two sets available, $399 shipped in the U.S. per set, $750 both sets shipped in the U.S. (1.8 ratio also available for the same price, contact me.)




____

TRW L2404-040 pistons, for a 4.40" bore (ie, for 0.040" overbore), wrist pin is included, for press-fit rods (not for floating rods, 0.180" deep dish, 22cc dish volume, accepts a 5/64" - 5/64" - 3/16" ring pack (not included), for standard valve layout heads, quantity of 6 for $200 shipped or $39 apiece shipped.




____
TRW L2443-030 pistons, for a 4.39” bore (ie, for 0.030" overbore), wrist pin is included, for press-fit or floaring rods accepts a 5/64" - 5/64" - 3/16" ring pack (not included), for standard valve layout heads, these have the round wire clip grooves, round wire locks included, quantity of 2 for $85 shipped or $45 apiece shipped. (Contact me about my TRW L2443s with square cut clip grooves if you need some of those.)



____

$1100+ worth of Autometer Gauges, 160 mph Speedo (5154), 10K RPM tach (5160), two liquid filled oil pressure (5421 & M-9278-A971), liquid filled water temp (5432), Volt meter (5492), two Fuel (5415 & 5416), fuel pressure gauge, etc, Value well over $1100, Sell $789 shipped


____

Hooker Super Comp Headers for a Ford F250, part number 6911HKR, full-length tuned headers, fits 1983-1987 F-250 2WD truck with 460 & auto trans (may fit other years/1981-1982 w/460 installed). Tuned 1-3/4” primary tubes, 3” collectors, 5/16” flanges, etc. We proved these in a truck with zero issues, then, we removed them, had them professionally cleaned, fully stripped, had the outsides of the primary tubes-to-header flanges silicon-bronze brazed (this absorbs vibration and minimizes possibility of cracking), and then they were freshly ceramic coated. They are better than brand new from Hooker. Summit wants $550 (and those are not silicon-bronze brazed), sell for $350




____

All prices are plus shipping unless otherwise noted. Please call High Flow Dynamics directly if interested. 31Zero-435-19ZeroZero

(Parts Listing Continued Next Post)
 

·
Premium Member
Joined
·
5,560 Posts
Discussion Starter #3
____
Customized Blue Thunder finned aluminum valve covers, a la 429 CJ style, with welded in Peterson oil fill cap & bung + breathers, nice, $189






____

Ford 460 timing cover RF F6TE-6059-GA, 1996-up style with no provisions for dip stick or mechanical fuel pump, new seal installed, retails for $159, sell for $109




____
Ford 429 460 front sump passenger car oil pan, $30 + ship




____
Ford F700 Commercial 429 Truck Pan, never hurt, straight and solid, just needs blast & paint, pickup included, nice $150




____
370 heads, cores, $100

____
Borg Warner T-19 4-speed trans, from 1985 F-250HD 2WD, 5.11 first gear, xlnt cond. $250


____
460 D5TE truck manifolds, $50/pr
____

All prices are "plus shipping" unless otherwise noted, package deals will be considered.
Please call High Flow Dynamics directly if interested. 31Zero-435-19ZeroZero
[/b]
 
1 - 3 of 3 Posts
Top