Blue Thunder BBF (460) Heads with the Chev exhaust port. These are complete, Knowlton's Thunderheads check them out and did some clean up work on the ports and chambers and they now flow 366 cmf intake and 267 cmf exhaust. Valves are Ferrea Competition series 2.25 intake and 1.88 ex These will get you past 800hp with the right supporting cast.
The bare castings sell for $1650 a set and the valves are $25 each.
504ci (4.40 bore X 4.15 stroke) complete intake to oil pan for sale.
Block: DIVE Block w/ partial Hard Blok fill
Intake: Ford Motorsports 460
Crank: Scat 4340 steel crank w/ 2.20 rod journals
Rods: Eagle ESP 6.700 H beam w/upgraded ARP L-19 bolts
Cam: Comp Cams with .762 intake/exhaust lift...
I have for sale a set of 427 FE Long Tube Manifolds. They came off of my 63 Galaxie before I dropped my 521 big block in the car. I am asking $1500obo. I will cover shipping. I am located in Vista California and I can be reached at [email protected] Let me know if you have any questions.
I am very new here on the site so forgive me if I ask any ignorant questions. I bought a 75 Ford with a 360 (supposedly rebuilt) that had a crack in the block. I'm replacing it with a rebuilt 460 but was told I needed a bell housing for the Transmission. The information I got off the Tranny tag...
I have a 460 that I believe to be a 1971 with the crank driven power steering pump. In as removed condition, was running fine fine while I was in Idaho but when I got back to Texas I had trouble getting the higher octane gas and it would ping. The Mad Porter built me a beast that tolerates...