460 Ford Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
My friend is in need of a transmission for his Mud Truck, just pulled the 390 out and there are cracked off peices around the bellhousing where the bolts go in. Could even just use the shell to put the guts into. Someone help us, we are trying to get ready for the Mud Runs coming up.
 

·
Registered
Joined
·
24 Posts
C-6 for BBF

I've got a useable core for $50.00
Sorry I just sold the race set-up C-6 out of my mud drag truck for $300.00 2 weeks ago.
 

·
Registered
Joined
·
63 Posts
Discussion Starter #3
Now will that bolt up to the transfer case as well. Its a 390 BBF that we will be attaching it to, also the transfer case bolts directly to the tranny, like where the tail shaft would be.
 

·
Registered
Joined
·
24 Posts
Tailshaft

NO there is no tailshaft housing on this trans I sold it with the old trans but you can get one for about $20.00
This trans is for a 385 series motor not a FE style
IF you need a FE style trans I have one that is complete and ready to bolt in, with tailshaft for transfer case I will sell also.
I've also got a 205 transfer case if your interested.
 

·
Registered
Joined
·
63 Posts
Discussion Starter #5
Alright well I think that we have found out that the 390 is an FE engine, so this tranny would not work for his application.
 
1 - 5 of 5 Posts
Top