460 Ford Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
368 Posts
Discussion Starter #1
I am looking for a set of used "old school" Pistons for C-3 Yates heads.

My motor is;
9.184 deck
4.10 bore
3.5 stroke
2.100 rod
.928 pin

I need pistons for Yates Heads w/ 48cc
Flat top or dish
Bore size; 4.10 to 4.060
CH;..........1.435
.928 pin or I can bush my rods down to fit.
 

·
Registered
Joined
·
3,730 Posts
And I have seen many 6.2 rods out there but not for 2.100 journal.
What ch and pin size in your pistons?
pin size, .927. lot of 6.200 rods with 2.100 out there . I got three sets of them, 4 if you count the big end for a stock C/W rod
 
1 - 4 of 4 Posts
Top