460 Ford Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
139 Posts
Discussion Starter #1
Does anyone have a set of springs that i could run 700 lift hyd roller cam, also need a good set of lifters and rockers,
 

·
Registered
Joined
·
334 Posts
Springs and rockers

I have two sets of 1.550" dia dual with damper. Good for at least .710" lift. 190 lbs @ 2.00" - 225 lbs @ 1.950" Polished finish to resist fatigue. One set like new, the other was installed on heads, never on engine. Went to a larger cam-bigger engine, needed bigger springs. $100.00 for set in like new condition, $250.00 for the new set. Also have a set of Crane Gold (1.7:1 ratio) 7/16" stud. In good condition. $125.00.

Skip Ohnmacht
(315) 343-6030 days
(315) 343-3666 eves
 
1 - 2 of 2 Posts
Top