460 Ford Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
667 Posts
Discussion Starter #1
hey guys,
i thought i would check here 1st. i'm going to build a stroker, i'm open to stroke and c.i. crank can be 4.14, 4.30, or 4.50 stroke, 6.7 or 6.8 H beam rods, pistons must be forged and w/scj valve reliefs, .030,.040, .060 oversize flat tops.

thanks,
steve
 
1 - 1 of 1 Posts
Top